2-21
Confidential
8703 When optional output tray is
specified, the stack sensor of
optional output tray detected
full state.
2-92
8800 ---
8900 When 2-sided printing is
performed, registration front
sensor detected that the paper
size is smaller than Letter or the
length exceeds Legal.
2-93
8D00 ---
8E00 ---
8F00 ---
8F01 ---
8F02 ---
8F03 ---
9001 When receiving print command
from MP tray, the MP tray paper
size setting (Function setting)
and paper size of the data
designated for printing are not
identical.
2-94
9002 When receiving print command
from tray 1, the tray 1 paper
size setting (Function setting)
and paper size of the data
designated for printing are not
identical.
2-94
9003 When receiving print command
from tray 2, the tray 2 paper
size setting (Function setting)
and paper size of the data
designated for printing are not
identical.
2-94
9004 When receiving print command
from tray 3, the tray 3 paper
size setting (Function setting)
and paper size of the data
designated for printing are not
identical.
2-94
Error
Codes
Problem
Refer
to:
9005 When receiving print command
from tray 4, the tray 4 paper
size setting (Function setting)
and paper size of the data
designated for printing are not
identical.
2-94
9102 When receiving print command
from tray 1, the paper size of
the data designated for
printing is larger than the paper
size detected at tray 1 width
sensor.
2-95
9103 When receiving print command
from tray 2, the paper size of
the data designated for printing
is larger than the paper size
detected at tray 2 width sensor.
2-95
9104 When receiving print command
from tray 3, the paper size of
the data designated for printing
is larger than the paper size
detected at tray 3 width sensor.
2-95
9105 When receiving print command
from tray 4, the paper size of
the data designated for printing
is larger than the paper size
detected at tray 4 width sensor.
2-95
9200 When receiving print command
from MP tray with thick paper
setting, back cover sensor
detected that the cover is close
state.
2-96
9301 When receiving print command
from MP tray, MP paper empty
sensor detected no paper state.
2-97
9302 When receiving print command
from tray 1, T1 paper empty
sensor detected no paper state.
2-97
9303 When receiving print command
from tray 2, T2 paper empty
sensor detected no paper state.
2-97
Error
Codes
Problem
Refer
to:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
