Cisco ASR 1013Cisco ASR 1006Cisco ASR 1004Cisco ASR 1002,
1002-F, and
1002-X
2
Cisco ASR 1001Characteristic
•
Loaded
with AC
power
supply —
184 lb
(83.46 kg)
•
Loaded
with DC
power
supply —
190.6 lb
(86.45 kg)
•
Total
weight
with
superslots
— 202 lb
(91.62 kg)
with AC
and 208.60
lb (94.61
kg) with
DC
75 lb (34.019
kg) fully loaded
50 lb (22.679
kg) fully loaded
•
40 lb
(18.143
kg) for a
fully
loaded
Cisco
ASR 1002
Router or
Cisco
ASR
1002-F
Router
•
43.35 lb
(19.662
kg) for a
fully
loaded
Cisco
ASR
1002-X
Router
•
23.30 lb
(10.6 kg)
(with dual
AC power
and
integrated
daughter
card)
•
22.70 lb
(10.3 kg)
(with dual
DC power
and
integrated
daughter
card)
•
25 lb
(11.35 kg)
fully
loaded
Weight
2
Unless otherwise noted, the physical characteristics for the Cisco ASR 1002-F Router and Cisco ASR 1002-X Router remain the same as those for the Cisco
ASR 1002 Router.
The following list describes additional Cisco ASR 1000 Series chassis characteristics:
•
Cisco ASR 1001 Router:
◦
Chassis height meets EIA-310 rack spacing 1RU (1.71 in./43.43 mm), universal rack-mount
◦
Chassis width meets EIA-310 19-in. (17.3 in./439.42 mm) wide with rack brackets
◦
Cable-management brackets allow a bend radius of 1.5 in. (38.1 mm) for cables
◦
Ships with forward rack-mount brackets installed and an extra set included in the accessory kit
•
Cisco ASR 1002 Router and Cisco ASR 1002-X Router:
◦
Chassis height meets EIA-310 rack spacing 2RU (3.47 in./ 88.138 mm), universal rack-mount
◦
Chassis width meets EIA-310 19-in. (17.25 in./438.15 mm) wide with rack brackets
◦
Cable-management brackets at the Cisco ASR 1002 Router location can hold 16 ports of STP/UTP
RJ 45 cables
Cisco ASR 1000 Series Router Hardware Installation Guide
121
Preparing Your Site for Installation
Site Selection Guidelines
To Next Page
Loading...
Need help?
General
