Cisco CRS-1 - Carrier Routing System Router User Manual

3-31
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Chapter 3 Provisioning Telephony and Media
Provisioning ASR and TTS in Cisco CRS
Note For a complete description of all columns, icons, and buttons on this page,
see Chapter 15, “The Subsystems Menu.”
Step 3 Click the Add MRCP TTS Server hyperlink.
The MRCP TTS Server Configuration web page opens.
Step 4 Use this web page to specify the following:
Step 5 Click Add to apply changes.
Your changes appear in the MRCP TTS Server List web page. You are now ready
to provision MRCP TTS Default Genders.
Field Name Description
Server Name Host name or IP address of the server the MRCP
TTS server software is installed on.
Port TCP port number used to connect to the MRCP
Server. The valid options are:
• ScanSoft Server - 4900
• Nuance Server - 554
Note The range is between 30000 and 32323.
Provider Drop-down list, choose the name of the MRCP TTS
provider associated with this server.
Locales
Languages supported by the TTS Provider. Select a
language from the drop-down list and click Add
Language; the selected language appears in the
Enabled Language list.
Use the check box to specify the playback “gender”
for the language: Male, Female, or Neutral. Select as
many genders as you have installed and enabled on
the specified MRCP TTS Server.

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English