Cisco IE-3000-8TC Administration Guide

Table 15: Settings on the Users tab
DescriptionSetting
Enter the unique identification name for the user. You
can enter any character, including alphanumeric and
special characters. No character restrictions exist for
this field.
Each user ID must be unique; that is, you cannot create
two users that have the same user ID.
Enter a user ID that identifies who the user is,
not the function that the user performs. For
example, enter an E-mail ID to identify the
user. Do not enter a value that specifies a
function, such as operator.
Note
User ID
The password that you enter in the Password cell is
used the first time that the user logs in to the Cisco
Business Edition 3000 User Preferences Interface. Enter
a password that contains alphanumeric or special
characters.
The system requires that the user change the password
the first time that the user logs in to the Cisco Business
Edition 3000 User Preferences Interface. For the user
to log in, you must communicate the user ID, password,
and URL for the Cisco Business Edition 3000 User
Preferences Interface to the user.
You can enter the same password for all users that you
add.
Password
Enter the first name of the user. Enter up to 64
characters, except for quotation marks (").
First Name
Enter the last name of the user. Enter up to 64
characters, except for quotation marks (").
Last Name
Select the usage profile that you want to assign to the
user. The usage profile that you select gives rights to
the user, such as the ability to use certain calling
features if the phone supports the feature.
Usage Profile
In the Line Number cell, enter a unique extension for
the user. Enter an extension in the extension range as
specified in the dial plan. (Extensions must be unique
to this user.)
For more information about extension length, see Dial
Plan Tab Settings, on page 81.
You can configure a maximum of 10 line
numbers for each user.
Note
Line Number
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
92 OL-27022-01
Users Tab Settings

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes