DescriptionSettings
Specifies the description of the connection group.
The description can include up to 128 characters, but it cannot
include quotation marks ("), percentage sign (%), ampersand
(&), backslash (\), or angle brackets (<>).
The description for All Connections is
system-generated and you cannot modify the
description.
Note
Description
Specifies the number of PSTN connections selected to be a
part of the connection group.
PSTN Connections
You can perform the following actions on the connection
groups:
• View—Click to view the list of all connections that are
a part of the All Connections group. This is a
system-generated connection group and includes all
connections added into the system, in the same order
as configured.
This option is available for the All Connections
group only. You cannot edit or delete this
connection group.
Note
• Edit—Click to edit the settings of the corresponding
connection group. Refer to the parameters explained
under the Add Connection Group Information for
editing the connection groups.
If the connection group is empty, calls from
site will not work correctly.
Note
• Delete—Click to delete the connection group from
Cisco Business Edition 3000.
A connection group may be used to route calls
in a particular site. If you delete a connection
group and if there are no other connection
groups on the site, the PSTN calls will not be
routed properly.
Note
Actions
Click to add a new connection group.
If the connection group is empty, calls from site will
not work correctly.
Note
Add Connection Group
Add Connection Group Information
General Information
Enter the name for the connection group.Name
Enter the description for the corresponding connection group.Description
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
206 OL-27022-01
To Next Page
Loading...
Need help?
General
