Cisco IE-3000-8TC Administration Guide

DescriptionSettings
PSTN Connections Information
Calls will be routed in top-down order within the connection group. Move preferred PSTN connections to
the top of the list of selected connections.
This option allows you to choose from a list of gateways added to your system to be used for routing PSTN
calls made from phones placed in this site. You can order the selected PSTN connections you wish to use.
Select the required connection and click Add to route the
PSTN calls.
Add
Select the connection in the required area and click Remove
to remove the connection group.
Remove
Click Add All to select and add all the available PSTN
connections.
Add All
Click Remove All to select and remove all the selected PSTN
connections.
Remove All
Click Save to save your changes.Save
Click Reset to discard your changes and display the saved
data.
Reset
Click OK to configure a new connection group to route the
PSTN calls.
OK
Click Cancel to discard the configuration.Cancel
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 207

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes