Cisco IE-3000-8TC Administration Guide

DescriptionSetting
Check the check box to enable delivery of the display information
element (IE) in SETUP and NOTIFY messages (for DMS protocol)
for the calling and connected party name delivery service.
Display IE Delivery
Check this check box to indicate the first redirecting number and
the redirecting reason of the call when the call is forwarded. (The
UUIE part of the outgoing SETUP message from the Cisco Business
Edition 3000 includes the Redirecting Number IE.)
Uncheck the check box to exclude the first redirecting number and
the redirecting reason.
You use Redirecting Number IE for voice-messaging integration
only. If your configured voice-messaging system supports
Redirecting Number IE, check the check box.
Redirecting Number IE
Delivery–Inbound
Check this check box to accept the Redirecting Number IE in the
incoming SETUP message to the Cisco Business Edition 3000. (The
UUIE part of the SETUP message includes the Redirecting Number
IE.)
Uncheck the check box to exclude the Redirecting Number IE.
You use Redirecting Number IE for voice-messaging integration
only. If your configured voice-messaging system supports
Redirecting Number IE, you should check the check box.
Redirecting Number IE
Delivery–Outbound
Check this check box only if users are not receiving ringback tones
on outbound calls.
When this check box is checked, the Cisco Business Edition 3000
sends Q.931 Setup messages out digital (that is, non-H.323)
gateways with the Progress Indicator field set to non-ISDN.
This message notifies the destination device that the gateway is
non-ISDN and that the destination device should play in-band
ringback.
This problem usually associates with a Cisco Business Edition 3000
that connect to PBXs through digital gateways.
Setup non-ISDN Progress Indicator IE
Enable
Outbound Call Routing
Select whether you want the Cisco Business Edition 3000 to allow
or restrict the display of the calling party phone number.
• Default—If you do not want to change the calling line ID
presentation
• Allowed—To indicate that the Calling Line ID is Allowed on
outbound calls
• Restricted—To indicate that Calling Line ID is Restricted on
outbound calls
Calling Party Presentation
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
266 OL-27022-01
Connection Settings

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes