DescriptionSetting
Short Delay consists of the following:
• Ring Delay (sec)
• Answer Delay (sec)
• Ring Duration (sec)
Click Edit to change the configuration settings.
Click Delete to remove the Short Delay ring timing. You
can delete Short Delay timing only if the Short Delay is not
in use.
The default value for answer delay is 1.5 seconds and ring
duration is 20 seconds.
If Short Delay is not in use, and if you click Delete,
a window appears to confirm delete.
Note
If the Short Delay is in use and if you click Delete,
the system prompts "The ring timing set 'Short
Delay' cannot be deleted because it is configured
for the users listed below. The Reach Me Anywhere
settings for these users must be switched to a
different ring timing set before this one can be
deleted."
Note
Short Delay
Moderate Delay consists of the following:
• Ring Delay (sec)
• Answer Delay (sec)
• Ring Duration (sec)
Click Edit to change the configuration settings.
The default value for answer delay is 2.5 seconds and ring
duration is 25 seconds.
You cannot delete the ring timing set for Moderate delay
because it is a default setting.
Moderate Delay (default)
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
312 OL-27022-01
To Next Page
Loading...
Need help?
General
