Cisco IE-3000-8TC Administration Guide

DescriptionSetting
The MD5 checksum and Automatically Switch
Versions settings display before the upgrade starts.
If you enter a MD5 checksum, which is optional, the
system compares the value that you entered to the
value for the uploaded upgrade file. If the system
determines that the values do not match, the upgrade
is automatically cancelled because the upgrade file
appears to be corrupted. The MD5 checksum setting
is disabled for upgrades of ISO images that are
uploaded through DVD.
For upgrades of ISO images, you must select Yes to
automatically switch the version after the upgrade is
completed. A restart of the server automatically
occurs after the upgrade is complete.
If you are upgrading from Cisco Business
Edition 3000 Release 8.5 to 8.6,
Automatically Switch Versions option is
not applicable. Regardless of the option you
select, the system will automatically restart
after successful completion of the upgrade.
Note
MD5 Checksum and Automatically Switch Versions
Cisco Business Edition 3000 displays status of the
download of the file, the validation of the MD5
checksum, and the progress of the upgrade. To stop
the upgrade, click Cancel.
If you are upgrading from Cisco Business
Edition 3000 Release 8.5 to 8.6, the Cisco
Business Edition 3000 Administrative
Interface will not be available until the
upgrade is complete (this might take several
hours). If you want to monitor the upgrade
progress, you must connect an external
monitor to the Cisco Business Edition 3000
server.
Note
Status of Upgrade
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 369

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes