D-Link xStack - Show Qinq Ports

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
997
86-6 show qinq inner_tpid
Description
This command is used to display the inner TPID of the system.
Format
show qinq inner_tpid
Parameters
None.
Restrictions
None.
Example
To display the inner TPID of the system:
DGS-3620-28SC:admin#show qinq inner_tpid
Command: show qinq inner_tpid
Inner TPID: 0x8100
DGS-3620-28SC:admin#
86-7 show qinq ports
Description
This command is used to display the Q-in-Q configuration of ports.
Format
show qinq ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports to be displayed.
Note: If no parameter specified, the system will display port information for all ports.
Restrictions
None.