D-Link xStack - Disable Autoconfig

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
155
Format
enable autoconfig
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable DHCP auto configuration status:
DGS-3620-28SC:admin#enable autoconfig
Command: enable autoconfig
Success.
DGS-3620-28SC:admin#
10-3 disable autoconfig
Description
This command is used to disable automatically to get configuration from a TFTP server.
Format
disable autoconfig
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable the DHCP auto configuration status:
DGS-3620-28SC:admin#disable autoconfig
Command: disable autoconfig
Success.