D-Link xStack - Config Scheduling

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
979
Success.
DGS-3620-28SC:admin#
85-4 show per_queue bandwidth_control
Description
This command is used to display the bandwidth control setting of per egress queue for each port.
Format
show per_queue bandwidth_control {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports to be displayed.
Restrictions
None
Example
To display the port bandwidth control table for port 1:
DGS-3620-28SC:admin#show per_queue bandwidth_control 1
Command: show per_queue bandwidth_control 1
Queue Bandwidth Control Table On Port: 1
Queue Min Rate(Kbit/sec) Max Rate(Kbit/sec)
0 No Limit No Limit
1 No Limit No Limit
2 64 1024
3 64 No Limit
4 No Limit No Limit
5 No Limit No Limit
6 No Limit No Limit
7 No Limit No Limit
DGS-3620-28SC:admin#
85-5 config scheduling
Description
This command is used to configure the traffic scheduling mechanism for each CoS queue.
Format
config scheduling {ports [<portlist> | all]} <class_id 0-7> [strict | weight <value 1-127>]