D-Link xStack - Show Cfm Ports

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
250
DGS-3620-28SC:admin#
16-13 show cfm ports
Description
This command is used to display the CFM state of specified ports.
Format
show cfm ports <portlist>
Parameters
<portlist> - Enter the logical port list.
Restrictions
None. (EI Mode Only Command)
Example
To display the CFM state for ports 3 to 6:
DGS-3620-28SC:admin#show cfm ports 3-6
Command: show cfm ports 3-6
Port State
----- -------
3 Enabled
4 Enabled
5 Enabled
6 Enabled
DGS-3620-28SC:admin#
16-14 show cfm
Description
This command is used to display the CFM configuration.
Format
show cfm {[md [<string 22> | md_index <uint 1-4294967295>] {ma [<string 22> | ma_index
<uint 1-4294967295>] {mepid <int 1-8191>}} | mepname <string 32>]}
Parameters
md - (Optional) Specify the maintenance domain name.
<string 22> - Enter the maintenance domain name. The maximum length is 22 characters.