D-Link xStack - Show Wac User

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1225
DGS-3620-28SC:admin# show wac ports 1-3
Command: show wac ports 1-3
Port State Aging Time Idle Time Block Time
(min) (min) (sec)
------- -------- ------------ ---------- -----------
1 Disabled 1440 Infinite 60
2 Disabled 1440 Infinite 60
3 Disabled 1440 Infinite 60
DGS-3620-28SC:admin#
115-15 show wac user
Description
This command is used to display WAC user accounts.
Format
show wac user
Parameters
None.
Restrictions
None.
Example
To show Web authentication user accounts:
DGS-3620-28SC:admin# show wac user
Command: show wac user
User Name Password VID
----------------- ----------------- ---------
123 ************ 1000
Total Entries : 1
DGS-3620-28SC:admin#
115-16 show wac auth_state ports
Description
This command is used to display the authentication state for ports.