D-Link xStack - Delete Authen Server_Group <String 15; Show Authen Server_Group {<String 15

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
70
Format
delete authen server_group <string 15>
Parameters
<string 15> - Enter the user-defined server group name.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete a user-defined authentication server group:
DGS-3620-28SC:admin#delete authen server_group mix_1
Command: delete authen server_group mix_1
Success.
DGS-3620-28SC:admin#
4-19 show authen server_group
Description
This command is used to display the authentication server groups.
Format
show authen server_group {<string 15>}
Parameters
<string 15> - (Optional) Specify the built-in or user-defined server group name.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all authentication server groups:
DGS-3620-28SC:admin#show authen server_group
Command: show authen server_group
Group Name IP Address Protocol
--------------- --------------- --------
mix_1 10.1.1.222 TACACS+