D-Link xStack - Config Authen Server_Host <Ipaddr> Protocol [Tacacs | Xtacacs | Tacacs+ | Radius]

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
72
Restrictions
Only Administrator-level users can issue this command.
Example
To create a TACACS+ authentication server host with a listening port number of 15555 and a
timeout value of 10 seconds:
DGS-3620-28SC:admin#create authen server_host 10.1.1.222 protocol tacacs+ port
15555 key "123" timeout 10
Command: create authen server_host 10.1.1.222 protocol tacacs+ port 15555 key
"123" timeout 10
Success.
DGS-3620-28SC:admin#
4-21 config authen server_host
Description
This command is used to configure an authentication server host.
Format
config authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] {port <int
1-65535> | [key [<key_string 254> | none] | encryption_key <key_string 344>] | timeout <int
1-255> | retransmit <int 1-20>}(1)
Parameters
<ipaddr> - Enter the server host’s IP address.
protocol - Specifies the server host’s type of authentication protocol.
tacacs - Specifies the server host’s authentication protocol TACACS.
xtacacs - Specifies the server host’s authentication protocol XTACACS.
tacacs+ - Specifies the server host’s authentication protocol TACACS+.
radius - Specifies the server host’s authentication protocol RADIUS.
port - Specifies the port number of the authentication protocol for the server host. The default
value for TACACS/XTACACS/TACACS+ is 49. The default value for RADIUS is 1812.
<int 1-65535> - Enter the port number of the authentication protocol for the server host. The
default value for TACACS/XTACACS/TACACS+ is 49. The default value for RADIUS is
1812. The port number must be between 1 and 65535.
key - Specifies the key for TACACS+ and RADIUS authentication.
<key_string 254> - Enter the key for TACACS+ and RADIUS authentication. If the value is
null, no encryption will apply. This value is meaningless for TACACS and XTACACS.
none - Specifies no encryption for TACACS+ and RADIUS authentication. This value is
meaningless for TACACS and XTACACS.
encryption_key - (Optional) Specifies the encrypted form key string for TACACS+ and RADIUS
authentication. This value is meaningless for TACACS and xTACACS. The encryption
algorithm is based on DES.
<key_string 344> - Enter the encrypted form key string for TACACS+ and RADIUS
authentication.
timeout - Specifies the time in seconds for waiting for a server reply. The default value is 5