D-Link xStack - Config Terminal Width; Show Terminal Width

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
28
Restrictions
None.
Example
To clear the terminal screan:
DGS-3620-28SC:admin#clear
Command: clear
2-26 config terminal width
Description
This command is used to configure the terminal width.
Format
config terminal width [default | <value 80-200>]
Parameters
default - Specifies the default terminal width value.
<value 80-200> - Enter a terminal width value between 80 and 200 characters. The default value
is 80.
Restrictions
None.
Example
To configure the terminal width:
DGS-3620-28SC:admin#config terminal width 90
Command: config terminal width 90
Success.
DGS-3620-28SC:admin#
2-27 show terminal width
Description
This command is used to display the configuration of the current terminal width.