D-Link xStack - Create Rspan Vlan

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1017
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable the RSPAN globally:
DGS-3620-28SC:admin#disable rspan
Command: disable rspan
Success.
DGS-3620-28SC:admin#
89-3 create rspan vlan
Description
This command is used to create an RSPAN VLAN. Up to 16 RSPAN VLANs can be created.
Format
create rspan vlan [vlan_name <vlan_name> | vlan_id <vlanid 1-4094>]
Parameters
vlan_name - Create the RSPAN VLAN by VLAN name.
<vlan_name> - Enter the VLAN name.
vlan_id - Create the RSPAN VLAN by VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID between 1 and 4094.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create an RSPAN VLAN entry by VLAN name “v2”:
DGS-3620-28SC:admin#create rspan vlan vlan_name v2
Command: create rspan vlan vlan_name v2
Success.
DGS-3620-28SC:admin#