D-Link xStack - Show Radius

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
48
3-23 show radius
Description
This command is used to display RADIUS server configurations.
Format
show radius
Parameters
None.
Restrictions
None.
Example
To display RADIUS server configurations:
DGS-3620-28SC:admin#show radius
Command: show radius
Index 1
IP Address : 192.168.69.1
Auth-Port : 1812
Acct-Port : 1813
Timeout : 5
Retransmit : 2
Key : 123456
Total Entries : 1
DGS-3620-28SC:admin#
3-24 show auth_statistics
Description
This command is used to display authenticator statistics information
Format
show auth_statistics {ports <portlist>}
Parameters
ports - (Optional) Specify a range of ports to be displayed.
<portlist> - Enter a range of ports to be displayed.