D-Link xStack - Create Snmp View; Delete Snmp View

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1052
ReadView Name : CommunityView
WriteView Name : CommunityView
Notify View Name : CommunityView
Security Model : SNMPv2
Security Level : NoAuthNoPriv
Total Entries: 3
DGS-3620-28SC:admin#
94-5 create snmp view
Description
This command is used to assign views to community strings to limit which MIB objects an SNMP
manager can access.
Format
create snmp view <view_name 32> <oid> view_type [included | excluded]
Parameters
<view_name 32> - Enter the view name to be created.
<oid> - Enter the object-identified tree (the MIB tree).
view_type - Specifies the access type of of the MIB tree in this view.
included - Specifies to include this view.
excluded - Specifies to exclude this view.
Restrictions
Only Administrator-level users can issue this command.
Example
To assign views to community strings to limit which MIB objects an SNMP manager can access:
DGS-3620-28SC:admin#create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DGS-3620-28SC:admin#
94-6 delete snmp view
Description
This command is used to remove a view record.
Format
delete snmp view <view_name 32> [all | <oid>]