D-Link xStack - Show Accounting

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
87
Restrictions
Only Administrator level users can issue this command.
Example
To create a user-defined accounting method list called “shell_acct”:
DGS-3620-28SC:admin#create accounting method_list_name shell_acct
Command: create accounting method_list_name shell_acct
Success.
DGS-3620-28SC:admin#
4-42 delete accounting method_list_name
Description
This command is used to delete a user-defined method list of accounting methods.
Format
delete accounting method_list_name <string 15>
Parameters
<string 15> - Enter the name of the user-defined method list here. This name can be up to 15
characters long.
Restrictions
Only Administrator level users can issue this command.
Example
To delete the user-defined accounting method list called “shell_acct” from switch:
DGS-3620-28SC:admin#delete accounting method_list_name shell_acct
Command: delete accounting method_list_name shell_acct
Success.
DGS-3620-28SC:admin#
4-43 show accounting
Description
This command is used to display the method list of accounting methods on switch.