D-Link xStack - Show Lldp

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
682
DGS-3620-28SC:admin#config lldp tx_delay 8
Command: config lldp tx_delay 8
Success.
DGS-3620-28SC:admin#
To change the re-initialization delay interval to five seconds:
DGS-3620-28SC:admin#config lldp reinit_delay 5
Command: config lldp reinit_delay 5
Success.
DGS-3620-28SC:admin#
57-4 show lldp
Description
This command is used to display LLDP.
Format
show lldp
Parameters
None.
Restrictions
None.
Example
To display LLDP:
DGS-3620-28SC:admin#show lldp
Command: show lldp
LLDP System Information
Chassis ID Subtype : MAC Address
Chassis ID : 00-11-22-33-44-55
System Name :
System Description : Gigabit Ethernet Switch
System Capabilities : Repeater, Bridge
LLDP Configurations
LLDP Status : Disabled
LLDP Forward Status : Disabled
Message TX Interval : 30