D-Link xStack - Show Mirror

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
740
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable mirroring configurations:
DGS-3620-28SC:admin#disable mirror
Command: disable mirror
Success.
DGS-3620-28SC:admin#
63-7 show mirror
Description
This command is used to display the current port mirroring configuration on the switch.
Format
show mirror {group_id <value 1-4>}
Parameters
group_id – (Optional) Specifies the group ID used for this display.
<value 1-4> - Enter the group ID used for this display here. This value must be between 1 and
4.
Restrictions
None.
Example
To display mirroring configuration: