D-Link xStack - Show Vlan

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1203
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable Generic VLAN Registration Protocol (GVRP):
DGS-3620-28SC:admin#disable gvrp
Command: disable gvrp
Success.
DGS-3620-28SC:admin#
113-12 show vlan
Description
This command is used to display summary information about each VLAN, which includes: VLAN
ID, VLAN Name, Tagged/Untagged/Forbidden status for each port, and Member/Non-member
status for each port.
Format
show vlan {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Specify the name of the VLAN to be displayed. The maximum
length is 32 characters.
Restrictions
None.
Example
To display VLAN settings:
DGS-3620-28SC:admin#show vlan
Command: show vlan
VLAN Trunk State : Disabled
VLAN Trunk Member Ports :
VID : 1 VLAN Name : default
VLAN Type : Static Advertisement : Enabled
Member Ports : 1-28
Static Ports : 1-28
Current Tagged Ports :
Current Untagged Ports: 1-28
Static Tagged Ports :