D-Link xStack - Disable Web

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
23
DGS-3620-28SC:admin#
2-19 disable web
Description
This command is used to disable Web UI.
Format
disable web
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable HTTP:
DGS-3620-28SC:admin#disable web
Command: disable web
Success.
DGS-3620-28SC:admin#
2-20 save
Description
This command is used to save the current configuration or log in non-volatile RAM.
Format
save {[config <pathname> | log | all]}
Parameters
config - (Optional) Specify to save configuration.
<pathname> - Enter the path name of the indicated configuration
log - (Optional) Specify to save log.
all - (Optional) Specify to save changes to currently active configuration and save logs.
Note: If no keyword is specified, all changes will be saved to bootup configuration file.