D-Link xStack - Chapter 91 Secure File Transfer Protocol (SFTP) Commands

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1024
Chapter 91 Secure File Transfer
Protocol (SFTP)
Commands
enable sftp server
disable sftp server
config sftp server {timeout <sec 30-600>}(1)
show sftp server
91-1 enable sftp server
Description
This command is used to enable the SFTP function globally. SFTP over SSH2 is a remotely
secure file transfer protocol providing security on all file operations. SFTP server runs as a
subsystem of SSH server. SSH server is required to be enabled before enabling SFTP server.
Format
enable sftp server
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable SFTP server globally.
DGS-3620-28SC:admin#enable sftp server
Command: enable sftp server
Success.
DGS-3620-28SC:admin#