D-Link xStack Reference Guide

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
20
Command: config serial_port baud_rate 9600
Success.
DGS-3620-28SC:admin#
2-14 enable clipaging
Description
This command is used to enable pausing of the screen display when show command output
reaches the end of the page. The default setting is enabled.
Format
enable clipaging
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable pausing of the screen display when show command output reaches the end of the page:
DGS-3620-28SC:admin#enable clipaging
Command: enable clipaging
Success.
DGS-3620-28SC:admin#
2-15 disable clipaging
Description
This command is used to disable pausing of the screen display when show command output
reaches the end of the page. The default setting is enabled.
Format
disable clipaging
Parameters
None.

D-Link xStack Specifications

General

Brand	D-Link
Model	xStack
Category	Switch
Language	English