D-Link xStack - Delete Fdb

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
494
filter_unregistered_groups - Specifies the filtering mode as filter_unregistered_groups.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the the multicast packet filtering mode for all VLANs:
DGS-3620-28SC:admin#config multicast vlan_filtering_mode all
forward_unregistered_groups
Command: config multicast port filtering_mode all forward_unregistered_groups
Success.
DGS-3620-28SC:admin#
37-7 delete fdb
Description
This command is used to delete a permanent FDB entry.
Format
delete fdb <vlan_name 32> <macaddr>
Parameters
<vlan_name 32> - Enter the name of the VLAN on which the MAC address resides. The
maximum length is 32 characters.
<macaddr> - Enter the MAC address to be deleted from the static forwarding table.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a permanent FDB entry:
DGS-3620-28SC:admin#delete fdb default 00-00-00-00-01-02
Command: delete fdb default 00-00-00-00-01-02
Success.
DGS-3620-28SC:admin#