D-Link xStack - Show Bgp

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
222
Restrictions
None. (EI Mode Only Command)
Example
To show flap BGProutes information:
DGS-3620-28SC:admin# show bgp flap_statistics
Command:show bgp flap_statistics
BGP local router ID is 172.29.232.182
Status codes: s suppressed, d damped, h history, * valid, > best, i –internal
Origin codes: i - IGP, e - EGP, ? – incomplete
Network From Flaps Duration Reuse Path
*d 10.0.0.0/16 172.29.232.177 4 00:13:31 00:18:10 100 ?
*d 10.2.0.0/16 172.29.232.177 4 00:02:45 00:28:20 100 i
Total Entries :2
DGS-3620-28SC:admin#
13-48 show bgp
Description
This command is used to display BGP configuration and summary of the BGP status.
Format
show bgp {summary}
Parameters
summary - (Optional) Specifies that the summary of the BGP status will be included in the
display.
Restrictions
None. (EI Mode Only Command)
Example
This example displays the BGP setting:
DGS-3620-28SC:admin# show bgp
Command: show bgp
BGP Global State : Disabled
Version : 4
BGP Router Identifier : 10.90.90.90