D-Link xStack - Page 228

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
223
Synchronization : Enabled
Enforce First AS : Enabled
Local AS number : 100
Scan Time : 60
Hold Time : 300 Seconds
Keepalive Interval : 100 Seconds
Dampening : Enabled
Always Compare MED : Disabled
Deterministics MED : Disabled
Med Confed : Disabled
Default Local Preference : 200
AS Path Ignore : Disabled
Compare Router ID : Enabled
MED Missing as Worst : Disabled
Compare Confederation Path : Disabled
Fast External Fallover : Enabled
Aggregate Next Hop Check : Disabled
BGP Trap : None
DGS-3620-28SC:admin# show bgp summary
Command: show bgp summary
BGP Router Identifier : 172.16.1.1
local AS number : 100
Dampening : Enabled
BGP AS Path Entries : 10
BGP Community Entries : 7
Neighbor Ver AS MsgRcvd MsgSent Up/Down State/PfxRcvd
----------- --- -- ------- ------- ------- -------------
10.100.1.1 4 200 26 22 00:14:23 23
10.200.1.1 4 300 21 51 00:13:40 0
10.200.1.5 4 300 21 5 00:10:05 Idle
Total Number of Neighbors:3
DGS-3620-28SC:admin#
13-49 show bgp reflection
Description
This command is used to display the route reflection configuration of BGP.
Format
show bgp reflection
Parameters
None.