D-Link xStack - Show Vlan Ports; Show Gvrp

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1205
113-14 show vlan ports
Description
This command is used to display summary information about Tagged, Untagged, and Forbidden
status for each port.
Format
show vlan ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports for which you want to display VLAN. The
beginning and end of the port list range are separated by a dash.
Restrictions
None.
Example
To display VLAN port settings:
DGS-3620-28SC:admin#show vlan ports 1-2
Command: show vlan ports 1-2
Port VID Untagged Tagged Dynamic Forbidden
------ ----- -------- ------ ------- ---------
1 1 X - - -
2 1 X - - -
DGS-3620-28SC:admin#
113-15 show gvrp
Description
This command is used to display the GVRP status for the switch.
Format
show gvrp
Parameters
None.
Restrictions
None.