D-Link xStack - Disable Syslog; Show Syslog

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
818
71-13 disable syslog
Description
This command is used to disable syslog from sending a message.
Format
disable syslog
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable syslog sending a message:
DGS-3620-28SC:admin#disable syslog
Command: disable syslog
Success
DGS-3620-28SC:admin#
71-14 show syslog
Description
This command is used to display the syslog protocol global state.
Format
show syslog
Parameters
None.
Restrictions
None.
Example
To display the syslog protocol global state: