D-Link xStack - Create Cpu Access_Profile Profile_Id <Value; 000000000000-Ffffffffffff> | Destination_Mac <Macmask 000000000000-Ffffffffffff> | 802.1 P; Dscp

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
113
Parameters
profile_id - Specifies the index of the access list profile.
<value 1-5> - Enter the value between 1 and 5.
all - Specifies to delete all the access list profiles.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete access list rules:
DGS-3620-28SC:admin#delete cpu access_profile profile_id 3
Command: delete cpu access_profile profile_id 3
Success.
DGS-3620-28SC:admin#
5-9 create cpu access_profile profile_id
Description
This command is used to create CPU access list profiles.
Format
create cpu access_profile profile_id <value 1-5> [ethernet {vlan | source_mac <macmask
000000000000-ffffffffffff> | destination_mac <macmask 000000000000-ffffffffffff> | 802.1p |
ethernet_type}(1) | ip {vlan | source_ip_mask <netmask> | destination_ip_mask <netmask> |
dscp | [icmp {type | code} | igmp {type} | tcp {src_port_mask <hex 0x0-0xffff> |
dst_port_mask <hex 0x0-0xffff> | flag_mask [all | {urg | ack | psh | rst | syn | fin}]} | udp
{src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex 0x0-0xffff>} | protocol_id_mask <hex
0x0-0xff> {user_define_mask <hex 0x0-0xffffffff>}]}(1) | packet_content_mask {offset_0-15
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_16-31
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_32-47
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_48-63
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_64-79
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>}(1) | ipv6
{class | flowlabel | source_ipv6_mask <ipv6mask> | destination_ipv6_mask <ipv6mask>}(1)]
Parameters
<value 1-5> - Enter a value between 1 and 5.
ethernet - Specifies an Ethernet CPU access control list rule.
vlan - Specifies a VLAN mask.
source_mac - Specifies the source MAC mask.
<macmask000000000000-ffffffffffff> - Enter the source MAC mask.
destination_mac - Specifies the destination MAC mask.
<macmask 000000000000-ffffffffffff> - Enter the destination MAC mask.
802.1p - Specifies the 802.1p priority tag mask.
ethernet_type - Specifies the Ethernet type mask.