18-1 enable command logging
Description
The enable command logging command is used to enable the command logging function.
Note: When the switch is under the booting procedure and the procedure of downloading the
configuration to execute immediately, all configuration commands should not be logged. When the
user is under AAA authentication, the user name should not changed if user uses “enable admin”
command to replace its privilege.
Format
enable command logging
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable the command logging function:
18-2 disable command logging
Description
The disable command logging command is used to disable the command logging function.
To Next Page
Loading...
Need help?
General