D-Link xStack - Enable Cfm; Disable Cfm

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
248
Command: delete cfm md op_domain
Success.
DGS-3620-28SC:admin#
16-10 enable cfm
Description
This command is used to enable the CFM globally.
Format
enable cfm
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
To enable the CFM globally:
DGS-3620-28SC:admin#enable cfm
Command: enable cfm
Success.
DGS-3620-28SC:admin#
16-11 disable cfm
Description
This command is used to disable the CFM globally.
Format
disable cfm
Parameters
None.