D-Link xStack - Disable Sntp; Config Time

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1134
106-5 disable sntp
Description
This command is used to turn off SNTP support.
Format
disable sntp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable SNTP:
DGS-3620-28SC:admin#disable sntp
Command: disable sntp
Success.
DGS-3620-28SC:admin#
106-6 config time
Description
This command is used to change the time settings.
Format
config time <date ddmthyyyy> <time hh:mm:ss>
Parameters
<date ddmthyyyy> - Enter the system clock date.
<time hh:mm:ss> - Enter the system clock time.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure time: