D-Link xStack - Disable Ipif

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
161
Parameters
<ipif_name 12> - The name of the interface.
all - All of the IP interfaces.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the state for interface petrovic1:
DGS-3620-28SC:admin#enable ipif petrovic1
Command: enable ipif petrovic1
Success.
DGS-3620-28SC:admin#
11-5 disable ipif
Description
This command is used to disable the state of an interface.
Format
disable ipif [<ipif_name 12> | all]
Parameters
<ipif_name 12> - The name of the interface.
all - All of the IP interfaces.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the state for an interface:
DGS-3620-28SC:admin#disable ipif petrovic1
Command: disable ipif petrovic1
Success.
DGS-3620-28SC:admin#