D-Link xStack Reference Guide

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1267
Appendix C Trap Entries
This table lists the trap logs found on the Switch.
Category
Trap Name
Description
OID
MAC Notification
swL2macNotification
This trap indicates the MAC addresses
variation in address table
Binding objects:
(1)swL2macNotifyInfo
1.3.6.1.4.1.171.11.118.
X.2.100.1.2.0.1
(X:module ID)
MAC-based Access
Control
swMacBasedAccessControlLogge
dSuccess
The trap is sent when a MAC-based
Access Control host is successfully logged
in.
Binding objects：
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
1.3.6.1.4.1.171.12.35.1
1.1.0.1
swMacBasedAccessControlLogge
dFail
The trap is sent when a MAC-based
Access Control host login fails.
Binding objects：
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
1.3.6.1.4.1.171.12.35.1
1.1.0.2
swMacBasedAccessControlAges
Out
The trap is sent when a MAC-based
Access Control host ages out.
Binding objects：
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
1.3.6.1.4.1.171.12.35.1
1.1.0.3
PIM6
pimNeighborLoss
A pimNeighborLoss notification signifies
the loss of an adjacency with a neighbor.
This notification should be generated
when the neighbor timer expires, and the
router has no other neighbor on the same
interface with the same IP version and a
lower IP address than itself.
This notification is generated whenever
the counter pimNeighborLossCount is
incremented, subject to the rate limit
specified by
pimNieghborLossNotificationsPeriod.
Binding objects:
(1) pimNeighborUpTime
1.3.6.1.2.1.157.0.1
pimInvalidRegister
A pimInvalidRegister notification signifies
that an invalid PIM Register message was
received by this device.
This notification is generated whenever
the counter pimInvalidRegisterMsgsRcvd
is incremented, subject to the rate limit
specified by
pimInvalidRegisterNotificationPeriod.
Binding objects:
(1) pimGroupMappingPimMode
(2) pimInvalidRegisterAddressType
(3) pimInvalidRegisterOrigin
(4) pimInvalidRegisterGroup
(5) pimInvalidRegisterRp
1.3.6.1.2.1.157.0.2
pimInvalidJoinPrune
A pimInvalidJoinPrune notification signifies
that an invalid PIM Join/Prune message
was received by this device.
This notification is generated whenever
the counter pim
InvalidJoinPruneMsgsRcvd
is incremented, subject to the rate limit
specified by
pimInvalidJoinPruneNotificationPeriod.
1.3.6.1.2.1.157.0.3

D-Link xStack Specifications

General

Brand	D-Link
Model	xStack
Category	Switch
Language	English