D-Link xStack - Chapter 52 Jumbo Frame Commands

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
655
Chapter 52 Jumbo Frame
Commands
enable jumbo_frame
disable jumbo_frame
config jumbo_frame ports [<portlist> | all] state [enable | disable]
show jumbo_frame {<portlist>}
52-1 enable jumbo_frame
Description
This command is used to enable support of Jumbo Frames.
Format
enable jumbo_frame
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable Jumbo Frames:
DGS-3620-28SC:admin#enable jumbo_frame
Command: enable jumbo_frame
DGS-3620-28SC:admin#
52-2 disable jumbo_frame
Description
This command is used to disable support of Jumbo Frames.
Format
disable jumbo_frame