D-Link xStack - Enable Gvrp; Disable Gvrp

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1202
DGS-3620-28SC:admin#config gvrp timer join 200
Command: config gvrp timer join 200
Success.
DGS-3620-28SC:admin#
113-10 enable gvrp
Description
This command is used to enable the Generic VLAN Registration Protocol (GVRP). The default is
disabled.
Format
enable gvrp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the generic VLAN Registration Protocol (GVRP):
DGS-3620-28SC:admin#enable gvrp
Command: enable gvrp
Success.
DGS-3620-28SC:admin#
113-11 disable gvrp
Description
This command is used to disable Generic VLAN Registration Protocol (GVRP).
Format
disable gvrp
Parameters
None.