D-Link xStack - Show Authorization; Config Authentication Server Failover

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
301
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the authorization global state:
DGS-3620-28SC:admin#disable authorization attributes
Command: disable authorization attributes
Success.
DGS-3620-28SC:admin#
20-12 show authorization
Description
This command is used to display the authorization status.
Format
show authorization
Parameters
None.
Restrictions
None.
Example
To display the authorization status:
DGS-3620-28SC:admin#show authorization
Command: show authorization
Authorization for Atributes: Enabled
DGS-3620-28SC:admin#
20-13 config authentication server failover
Description
This command is used to configure the authentication server failover function. When authentication
server fails, administrator can configure to: