xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
809
Parameters
<portlist> - Enter a port or range of ports to be displayed.
Restrictions
None.
Example
To display the packets analysis for port 1:7:
DGS-3620-28SC:admin#show packet ports 1:7
Command: show packet ports 1:7
Port number : 1:7
Frame Size/Type Frame Counts Frames/sec
--------------- ---------------------- -----------
64 0 0
65-127 0 0
128-255 0 0
256-511 0 0
512-1023 0 0
1024-1518 0 0
1519-1522 0 0
1519-2047 0 0
2048-4095 0 0
4096-9216 0 0
Unicast RX 0 0
Multicast RX 0 0
Broadcast RX 0 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
Port number : 1:7
Frame Type Total Total/sec
--------------- ---------------------- -----------
RX Bytes 0 0
RX Frames 0 0
TX Bytes 0 0
TX Frames 0 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
71-2 show error ports
Description
This command is used to display error statistics for a range of ports.
Format
show errors ports <portlist>
To Next Page
Loading...
