D-Link xStack - Chapter 9 Asymmetric VLAN Commands

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
152
Chapter 9 Asymmetric VLAN
Commands
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
9-1 enable asymmetric_vlan
Description
This command is used to enable the asymmetric VLAN function..
Format
enable asymmetric_vlan
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable asymmetric VLAN setting:
DGS-3620-28SC:admin# enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DGS-3620-28SC:admin#
9-2 disable asymmetric_vlan
Description
This command is used to disable the asymmetric VLAN function.
Format
disable asymmetric_vlan