D-Link xStack - Page 54

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
49
Restrictions
None.
Example
To display authenticator statistics information for port 3:
DGS-3620-28SC:admin# show auth_statistics ports 3
Command: show auth_statistics ports 3
Auth VID :100
MAC Address :00-00-00-00-00-03
Port number : 3
EapolFramesRx 0
EapolFramesTx 6
EapolStartFramesRx 0
EapolReqIdFramesTx 6
EapolLogoffFramesRx 0
EapolReqFramesTx 0
EapolRespIdFramesRx 0
EapolRespFramesRx 0
InvalidEapolFramesRx 0
EapLengthErrorFramesRx 0
LastEapolFrameVersion 0
LastEapolFrameSource 00-00-00-00-00-03
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
3-25 show auth_diagnostics
Description
This command is used to display authenticator diagnostics information.
Format
show auth_diagnostics {ports <portlist>}
Parameters
ports - (Optional) Specify a range of ports to be displayed.
<portlist> - Enter a range of ports to be displayed.
Restrictions
None.
Example
To display authenticator diagnostics information for port 3: