D-Link xStack - Page 55

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
50
DGS-3620-28SC:admin# show auth_diagnostics ports 3
Command: show auth_diagnostics ports 3
Auth VID 100
MAC Address 00-00-00-00-00-03
Port number : 1
EntersConnecting 20
EapLogoffsWhileConnecting 0
EntersAuthenticating 0
SuccessWhileAuthenticating 0
TimeoutsWhileAuthenticating 0
FailWhileAuthenticating 0
ReauthsWhileAuthenticating 0
EapStartsWhileAuthenticating 0
EapLogoffWhileAuthenticating 0
ReauthsWhileAuthenticated 0
EapStartsWhileAuthenticated 0
EapLogoffWhileAuthenticated 0
BackendResponses 0
BackendAccessChallenges 0
BackendOtherRequestsToSupplicant 0
BackendNonNakResponsesFromSupplicant 0
BackendAuthSuccesses 0
BackendAuthFails 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
3-26 show auth_session_statistics
Description
This command is used to display authenticator session statistics information.
Format
show auth_session_statistics {ports <portlist>}
Parameters
ports - (Optional) Specify a range of ports to be displayed.
<portlist> - Enter a range of ports to be displayed.
Restrictions
None.
Example
To display authenticator session statistics information for port 1:
DGS-3620-28SC:admin# show auth_session_statistics ports 3