xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1004
Success.
DGS-3620-28SC:admin#config qinq ports 1:3 add vlan_translation_profile 3
Command: config qinq ports 1:3 add vlan_translation_profile 3
Success.
DGS-3620-28SC:admin#config vlan_translation_profile 3 add rule_id 4 add svid
100 classify source_mac 00-00-00-11-22-33 source_ipv4 10.10.10.10 802.1p 2
ip_protocol 0 l4_dest_port 1813 outer_vid 10
Command: config vlan_translation_profile 3 add rule_id 4 add svid 100 classify
source_mac 00-00-00-11-22-33 source_ipv4 10.10.10.10 802.1p 2 ip_protocol 0
l4_dest_port 1813 outer_vid 10
Success.
86-13 show vlan_translation_profile
Description
This command is used to show flow-based VLAN translation rules in a profile.
Format
show vlan_trans
lation_profile {<pr
ofile_id_l
ist>}
Parameters
<profile_id_list> - (Optional) Specifies the profile ID number to be shown. If no profile ID is used,
all profiles will be displayed.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To show all profile rules:
DGS-3620-28SC:admin#show vlan_translation_profile
Command: show vlan_translation_profile
Profile ID:2
ports:
--------------------------------------------------------
Rule ID :1
Status : ACTIVE
Active Port : 1-2
Action : Add
To Next Page
Loading...
Need help?
General