D-Link xStack - Page 1100

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1095
DGS-3620-28SC:admin# config ssl cachetimeout 60
Commands: config ssl cachetimeout 60
Success.
DGS-3620-28SC:admin#
97-7 config ssl certificate chain
Description
This command is used to specify chain of certifications on the Switch.
Format
config ssl certificate chain [default | <cert_list>]
Parameters
default - Specifies to use the all certificates to constitute the SSL certificate chain.
<cert_list> - Specifies chain of certifications on the Switch.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure SSL chain of certifications
DGS-3620-28SC:admin#config ssl certificate chain web_ca2.cer,server.crt
Command: config ssl certificate chain web_ca2.cer,server.crt
Success.
DGS-3620-28SC:admin#
97-8 delete ssl certificate
Description
This command is used to delete a certification on the Switch.
Format
delete ssl certificate <path_filename 64>
Parameters
<path_filename 64> - Enter the certification file name on the Switch.