D-Link xStack - Page 1104

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1099
DGS-3620-28SC:admin# show stacking_mode
Command: show stacking_mode
Stacking mode : Enabled
DGS-3620-28SC:admin#
98-4 show stack_information
Description
This command displays stacking information.
Format
show stack_information
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To display the stack information:
DGS-3620-28SC:admin# show stack_information
Command: show stack_information
Stack topology status:
New device is detected, hot insert may happen after 7 seconds.
Topology :Duplex_Chain
My Box ID :3
Master ID :3
Box Count :1
Force Master Role: Enable
Box User Prio-
Prom Runtime H/W
ID Set Type Exist rity MAC Version Version
Version
--- ---- ------------- ----- ---- ------------------ ---------- --------- ----
----
1 - DGS-3620-28SC No
2 - NOT_EXIST No
3 User DGS-3620-28SC Exist 1 00-00-11-33-66-33 1.00.016 2.50.014 B1
4 - NOT_EXIST No
5 - NOT_EXIST No
6 - NOT_EXIST No