xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1144
Example
To delete a UDP port:
DGS-3620-28SC:admin# config udp_helper udp_port delete 55
Command: config udp_helper udp_port delete 55
Success.
108-7 show udp_helper
Description
This command is used to display the current UDP Helper configuration on the Switch.
Format
show udp_helper {[udp_port | ipif <ipif_name 12>]}
Parameters
udp_port - (Optional) Specifies the UDP port configured for the UDP Helper.
ipif - (Optional) Specifies the name of the IP interface name to be displayed.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
Restrictions
None.
Example
To display the current UDP Helper configuration:
DGS-3620-28SC:admin# show udp_helper
Command: show udp_helper
UDP Helper Status : Enabled
Application UDP Port
------------ ---------------
User App1 55
Interface Server
------------ ---------------
System 20.0.0.90
To display the current UDP Helper all configured ports:
To Next Page
Loading...
Need help?
General