xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1166
Restrictions
Only Administrator-level users can issue this command.
Example
To clear the current username of the RCP global server:
DGS-3620-28SC:admin#config rcp server clear username
Command: config rcp server clear username
Success.
110-15 show rcp server
Description
This command is used to display Remote Copy Protocol (RCP) global server information.
Format
show rcp server
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display RCP global server information:
DGS-3620-28SC:admin#show rcp server
Command: show rcp server
RCP Server Address :
RCP Server Username : travel
110-16 ping
Description
This command is used to send Internet Control Message Protocol (ICMP) echo messages to a
remote IP address. The remote IP address will then “echo” or return the message. This is used to
confirm connectivity between the switch and the remote device.
To Next Page
Loading...
